FARO Laser Tracker Rental Vantage S
Measuring large parts, molds, assemblies and machines used to be a challenging, time-consuming process and often had to be performed in a special inspection area. Portable FARO Laser Tracker Rentals make on-site measurement easy and fast, reducing inspection cycle times by up to 75%. They measure 3D coordinates by tracking a target that the user moves from one point to another on the object being measured. In seconds, these measurements can be compared against nominal CAD data so teams can either make informed adjustments or move forward with confidence.
FARO Laser Tracker Rental Vantage
The FARO Vantage is an extremely accurate, portable coordinate measuring machine that enables you to build products, optimize processes, and deliver solutions by measuring quickly, simply and precisely. Replacing conventional tools such as piano wire, plumb bobs, layout machines, large-volume xed CMMs, theodolites, optical transits, and total stations, the Vantage is a more accurate and reliable portable 3D measurement tool that allows you to streamline your processes and be confident in your measurement results.
Laser trackers operate by measuring two angles and a distance. The tracker sends a laser beam to a retroreflective target held against the object being measured. As light is reflected off the target, it bounced back and re-enters the tracker at the same position it left and is measured by a distance meter, measuring the distance between the tracker and target.
Faro CAM2
Spatial Analyzer Ultimate
Innovmetric PolyWorks Inspector
Alignment
• More accurate and less time-consuming than traditional methods
• Frequent measurements and proper trending of distortions• Real-time measurement con rms tolerances and
validates design
Reverse Engineering
• Acquire high accuracy digital scan data• Eliminate the need for hard masters
Tool Building
• Full volumetric accuracy tests (ensures parts are being assembled to the highest standard)
• Verify dimensional integrity and repeatability of the tool (identify or preempt tool defects)
Part Inspection
• Compare complex geometry, surfaces, and feature positions to nominal data
• No need to move the part to a xed inspection tool• Reduce production waste and non-conformance costs
Installation
• Lay out / level machine foundation
• Prevent damage during the machine’s initial run • Reduce wear and tear on mechanical parts
Manufacturing & Assembly Integration
• Obtain critical positioning feedback real-time
• Set moving parts to nominal coordinates
• Continuous survey to provide data at specific points while moving dynamically
Compact Size
The smallest and lightest FARO Laser Tracker ever built is incredibly easy to use and transport between job sites.
Water and Dust Resistant IP52 Rating
The Vantage can be used in demanding industrial conditions.
New Carrying Cases
An innovative travel case system takes the concept of portability to a whole new level.
SmartFind
Quickly and efficiently locates and locks on to the correct target.
MultiView Cameras
This patent pending integrated two-camera system can automatically point to a specific target, and quickly and efficiently locate a target when the target is not in its normal position.
TruADM
Patented 5th generation ADM system provides the accuracy needed for everyday, real-world applications.
Integrated Wi-Fi
Simply measure anywhere within the wireless networks range with no need to plug into a laptop computer for enhanced portability and convenience.
QuickComp
Optimizes measurements based on specific ranges to maintain high system accuracy.
TriMap Encoders
Three read head system that is self-mapping; enables faster service time in more convenient locations.
In-Line Optics
Designed for longer range; allow for measurement of even larger objects from one location.
Dimensions
Head Size: 224(W) x 416(H)mm (8.8(W) x 16.4(H)in)
Head Weight: 12.6kg (28lbs) Controller Weight: 4.8kg (10.6lbs)
Controller Size: 290(L) x 158(D) x 214(H)mm (11.4(L) x 6.2(D) x 8.4(H)in) – without filters
316(L) x 158(D) x 214(H)mm (12.4(L) x 6.2(D) x 8.4(H)in) – with filters
Range
Maximum Working Range:
80m (262.5ft) with select targets & 10°C to 35°C (50°F to 95°F) temperature range
60m (196.9ft) with standard 1.5in & 7/8in SMRs Horizontal Envelope: 360° – Infinite rotation 30m (98.4ft) with standard 1/2in SMR Vertical Envelope: 130° (+77.9° to -52.1°) Minimum Working Range: 0m (0ft) – Infinite rotation
Environmental
Altitude: -700 to 9,000m (-2,297 to 29,527ft)**** Humidity: 0 to 95% non-condensing Operating Temperature: -15°C to 50°C (5°F to 122°F)
Laser Emission**
632-663 nm Laser, 1 milliwatt max/cw. Class II Laser Product
MultiView Cameras
Field of View: 30°
Single Point Repeatability
25 points @ 1.6m (5.2ft): 8μm (0.0003in)
Distance Measurement Performance***
TruADM
Resolution: 0.5μm (0.00002in). Sample Rate 16,000/sec
Accuracy (MPE): 16μm + 0.8μm/m (0.00063in + 0.0000096in/ft)
R0 parameter (MPE): 16μm (0.00063in)
Max Radial Acceleration: 30m/sec2 Max Radial Velocity: > 25m/s
Angle Measurement Performance***
Angular Accuracy (MPE): 20μm + 5μm/m (0.00079in + 0.00006in/ft)
Precision Level Accuracy: +/- 2 arcseconds
Max Angular Acceleration: 860°/sec2 (15 rads/sec2) Max Angular Velocity: 180°/sec (π rads/sec)